Copie o seu comando

Pesquise o modelo do comando original para copiar os nossos comandos JMA

Legenda: Clique sobre a imagem para conhecer a definição

Frequência

Tipo de código

  1. Fixo. O código emitido pelo comando é sempre o mesmo. Não existe qualquer encriptação e, após duplicado, o comando cópia funciona diretamente no recetor.
  2. Rolling. O código emitido pelo comando muda com cada toque. Deve ser realizada a cópia do comando, gerando assim um comando da mesma marca e modelo mas com um número de série diferente, que será necessário registar no recetor. Existem instruções concretas para cada recetor relativas a como registar a cópia, quer seja à distância ou diretamente no recetor.

Botões

Auto-programável. O comando pode ser registado no recetor sem necessidade do comando original, sempre que a via rádio esteja habilitada e a memória não esteja cheia.

PROCESSO:

  • Diante do recetor, manter premido o comando JMA durante 10 segundos até que o LED vermelho se apague (aos 4 segundos) e passa novamente para verde (aos 10 segundos).
  • Quando o LED acender a verde, libertar o botão e esperar a que o LED se apagar definitivamente. Durante o processo, o LED verde acenderá e apagará um ou várias vezes segundo o tipo de código até apagar-se definitivamente.

 Se o processo não funcionar, provar o método padrão utilizando o comando original ou acedendo diretamente ao recetor

Copy

No copy

FOR: DTM SYSTEM® NE0

  • F 433,92MHz
  • C ROLLING CODE
  • B 2,4
  • AP YES
  • BT Slim / M-NOVA PRO / M-BT Advance
DTM SYSTEM® NE0

Ver comandos compatíveis JMA

Instruções para registo

Imprimir

HOW TO SYNCHRONISE DTM NEO SPACE ROLLING CODE REMOTE CONTROLS

DTM NEO remote control synchronisation can be performed either directly on the receiver itself or remotely using a remote control that is already synchronised with the receiver.

Remotely synchronising the remote control on the receiver

1. While holding the receiver’s button, press a button in the remote which you want to register. The light will blink.

While registering the remote in the receiver’s memory, the button controlling the output channel must be used. Only one button of the remote can be registered. Registering another button of the same remote will result in removing the previous one.

Synchronising the remote control directly on the receiver

1. press and hold button in previously registered remote for 15 seconds,

2. press and hold button in a remote which you want to register for 15 seconds, within 3 seconds after releasing the previous button,

3. the new remote is now registered with the same active button as in the previously registered remote.