FIND YOUR REMOTE

Find your remote and compatable JMA Remote to copy

Legend: Click on the symbols for further information

Frequency

Type of code

  1. Fixed. The code emitted by the remote control, is always the same. There is no encryption and once the remote control is duplicated, the copy works directly in the receiver.
  2. Rolling. The code emitted by the remote control, changes with each pulse. A copy of the remote control should be made, that way generating the same brand and model but with a different serial number, that will be necessary for registry in the receiver. There are specific instructions for each receiver of either how to register the copy, remotely or directly manipulating the receiver.

Buttons

Auto-Programmable The remote control can be registered in the receiver without the need of the original remote control, as long as radio communication is activated and the memory is not full.

PROCESS:

  1. In front of the receiver keep the JMA remote control pressed during 10 seconds until the red LED goes off (after 4 seconds) and it turns to green (at 10 seconds).
  2. Once the LED is green, release the button and wait for the LED to definitely go off. During the process, the green LED will flash once or several times depending on the code type until finally going off.

If the process does not work, test the standard method using the original remote control or gaining access directly from the receiver.

Copy

No copy

FOR: SOMFY® ALARMA

  • F 433,92
  • C ROLLING CODE
  • B 2,4
  • AP NO
SOMFY® ALARMA

See compatible JMA remotes

FOR: SOMFY® CVX

  • F 433,92
  • C FIX CODE
  • B 2,4
  • AP NO
  • BT Slim / M-FR1 / LITE / M-NOVA / M-BT / SR-4V / SR-48
SOMFY® CVX

See compatible JMA remotes

FOR: SOMFY® K-EASY

  • F 433,92
  • C ROLLING CODE
  • B 4
  • AP NO
SOMFY® K-EASY

See compatible JMA remotes

FOR: SOMFY® K-EASY NEW

  • F 433,92
  • C ROLLING CODE
  • B 4
  • AP NO
SOMFY® K-EASY NEW

See compatible JMA remotes

FOR: SOMFY® K-EASY OLD

  • F 433,92
  • C ROLLING CODE
  • B 4
  • AP NO
SOMFY® K-EASY OLD

See compatible JMA remotes

FOR: SOMFY® KEYGO

  • F 433,92
  • C ROLLING CODE
  • B 1
  • AP NO
SOMFY® KEYGO

See compatible JMA remotes

FOR: SOMFY® KEYTIS RTS

  • F 433,92
  • C ROLLING CODE
  • B 2,4
  • AP NO
  • BT Slim / M-FR1 / M-NOVA / M-BT
SOMFY® KEYTIS RTS

See compatible JMA remotes

Synchronising intructions

Print

SYNCHRONISING SOMFY ROLLING CODE REMOTE CONTROLS

SOMFY remote control can only be synchronised directly on the external receiver and remotely on the integrated shutter receiver. A distinction must be made between SOMFY and TELIS remote controls.

Synchronisation procedure on the receiver

External receiver

1. Press and hold the \"Prog\" button on the receiver for 2 seconds. The red LED on the receiver will remain lit.

Internal receiver (Telis)

1. Press and hold the up and down buttons on the Telis remote control for 2 seconds. The red LED on the receiver will remain lit.

Keytis remote control

2. Press the button of the device to be synchronised. The LED on the receiver will flash.

3. Wait until the LED turns off.

Telis 1RTS remote control

2. Press the rear button on the remote control for half a second. The LED on the receiver will flash.

3. Wait until the LED turns off.

Telis 4 RTS remote control

2. Press the channel selection button until the LED for the desired channel lights up.

3. Press the rear button on the remote control for half a second. The LED on the receiver will flash.

4. Wait until the LED turns off.

FOR: SOMFY® KEYTIS RTS NS

  • F 433,92
  • C ROLLING CODE
  • B 2,4
  • AP NO
  • BT Slim / M-FR1 / M-NOVA / M-BT
SOMFY® KEYTIS RTS NS

See compatible JMA remotes

Synchronising intructions

Print

SYNCHRONISING SOMFY ROLLING CODE REMOTE CONTROLS

SOMFY remote control can only be synchronised directly on the external receiver and remotely on the integrated shutter receiver. A distinction must be made between SOMFY and TELIS remote controls.

Synchronisation procedure on the receiver

External receiver

1. Press and hold the \"Prog\" button on the receiver for 2 seconds. The red LED on the receiver will remain lit.

Internal receiver (Telis)

1. Press and hold the up and down buttons on the Telis remote control for 2 seconds. The red LED on the receiver will remain lit.

Keytis remote control

2. Press the button of the device to be synchronised. The LED on the receiver will flash.

3. Wait until the LED turns off.

Telis 1RTS remote control

2. Press the rear button on the remote control for half a second. The LED on the receiver will flash.

3. Wait until the LED turns off.

Telis 4 RTS remote control

2. Press the channel selection button until the LED for the desired channel lights up.

3. Press the rear button on the remote control for half a second. The LED on the receiver will flash.

4. Wait until the LED turns off.

FOR: SOMFY® MITTO

  • F 433,92
  • C ROLLING CODE
  • B 2,4
  • AP NO
SOMFY® MITTO

See compatible JMA remotes