Legend: Click on the symbols for further information

Frequency

Type of code

  1. Fixed. The code emitted by the remote control, is always the same. There is no encryption and once the remote control is duplicated, the copy works directly in the receiver.
  2. Rolling. The code emitted by the remote control, changes with each pulse. A copy of the remote control should be made, that way generating the same brand and model but with a different serial number, that will be necessary for registry in the receiver. There are specific instructions for each receiver of either how to register the copy, remotely or directly manipulating the receiver.

Buttons

Auto-Programmable The remote control can be registered in the receiver without the need of the original remote control, as long as radio communication is activated and the memory is not full.

PROCESS:

  1. In front of the receiver keep the JMA remote control pressed during 10 seconds until the red LED goes off (after 4 seconds) and it turns to green (at 10 seconds).
  2. Once the LED is green, release the button and wait for the LED to definitely go off. During the process, the green LED will flash once or several times depending on the code type until finally going off.

If the process does not work, test the standard method using the original remote control or gaining access directly from the receiver.

Copy

No copy

CLEMSA® E Remote

Remove Remote
  • F 287
  • C FIX CODE
  • B 1,2,3
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-4V
CLEMSA® E

SEAV® TX Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 1,2,3,4,6
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
SEAV® TX

SEAV® BE EASY Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 2
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
SEAV® BE EASY

FADINI® BIRIO Remote

Remove Remote
  • F 868,3
  • C ROLLING CODE
  • B 1,2,4
  • AP YES
  • M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance
FADINI® BIRIO

Synchronising intructions

Print

SYNCHRONISING FADINI ROLLING CODE REMOTE CONTROLS

FADINI remote controls can be synchronised either directly on the receiver or remotely using a remote control already synchronised with the receiver.

Remote synchronisation procedure

1. Press buttons 1 and 2 simultaneously on the new remote control and hold for 10 seconds.

2. Release, and before 15 seconds elapse press buttons 1 and 2 of the device already synchronised in the facility and hold for at least 10 seconds.

3. Finally, press any button of the device to be synchronised.

Direct synchronisation procedure on the receiver

1. In the receiver, use a jumper to bypass C1.

2. Press button P in the receiver and button 1 on the remote control to be synchronised for 5 seconds.

3. Release the buttons on both devices and remove the jumper.

4. Repeat the operation for all channels, bypassing the relevant channel each time (C2, C3 and C4).

DICKERT® HS-868-21 Remote

Remove Remote
  • F 868,3
  • C ROLLING CODE
  • B 4
  • AP NO
DICKERT® HS-868-21

FADINI® JUBI SMALL Remote

Remove Remote
  • F 433,92
  • C ROLLING CODE
  • B 2
  • AP YES
  • M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance
FADINI® JUBI SMALL

Synchronising intructions

Print

SYNCHRONISING FADINI ROLLING CODE REMOTE CONTROLS

FADINI remote controls can be synchronised either directly on the receiver or remotely using a remote control already synchronised with the receiver.

Remote synchronisation procedure

1. Press buttons 1 and 2 simultaneously on the new remote control and hold for 10 seconds.

2. Release, and before 15 seconds elapse press buttons 1 and 2 of the device already synchronised in the facility and hold for at least 10 seconds.

3. Finally, press any button of the device to be synchronised.

Direct synchronisation procedure on the receiver

1. In the receiver, use a jumper to bypass C1.

2. Press button P in the receiver and button 1 on the remote control to be synchronised for 5 seconds.

3. Release the buttons on both devices and remove the jumper.

4. Repeat the operation for all channels, bypassing the relevant channel each time (C2, C3 and C4).

CLEMSA® E-600 Remote

Remove Remote
  • F 286
  • C FIX CODE
  • B 1,2,3
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-4V
CLEMSA® E-600

PROGET® BUGGY CHROME Remote

Remove Remote
  • F 433,92
  • C ROLLING CODE
  • B 2
  • AP NO
PROGET® BUGGY CHROME

KEY® SUB44R Remote

Remove Remote
  • F 433,92
  • C ROLLING CODE
  • B 4
  • AP NO
  • M-NOVA PRO / BT Slim / M-BT Biometric / M-BT Advance
KEY® SUB44R

CLEMSA® DIGICODE MH Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 1,2,3
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
CLEMSA® DIGICODE MH

SEAV® BE SMART S2 Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 2,4
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
SEAV® BE SMART S2

FADINI® ASTRO 75 Remote

Remove Remote
  • F 315
  • C FIX CODE
  • B 1,2,4
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-4V
FADINI® ASTRO 75

KEY® TXG-44 Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 4
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
KEY® TXG-44

PROGET® ETY B Remote

Remove Remote
  • F 433,92
  • C ROLLING CODE
  • B 2,4
  • AP NO
PROGET® ETY B

PROGET® EMY N Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 2
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
PROGET® EMY N

FADINI® JUBI 433 Remote

Remove Remote
  • F 433,92
  • C ROLLING CODE
  • B 1,2,4
  • AP YES
  • M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance
FADINI® JUBI 433

Synchronising intructions

Print

SYNCHRONISING FADINI ROLLING CODE REMOTE CONTROLS

FADINI remote controls can be synchronised either directly on the receiver or remotely using a remote control already synchronised with the receiver.

Remote synchronisation procedure

1. Press buttons 1 and 2 simultaneously on the new remote control and hold for 10 seconds.

2. Release, and before 15 seconds elapse press buttons 1 and 2 of the device already synchronised in the facility and hold for at least 10 seconds.

3. Finally, press any button of the device to be synchronised.

Direct synchronisation procedure on the receiver

1. In the receiver, use a jumper to bypass C1.

2. Press button P in the receiver and button 1 on the remote control to be synchronised for 5 seconds.

3. Release the buttons on both devices and remove the jumper.

4. Repeat the operation for all channels, bypassing the relevant channel each time (C2, C3 and C4).

FADINI® ASTRO 78A Remote

Remove Remote
  • F 30,875
  • C FIX CODE
  • B 1,2,4
  • AP NO
  • M-Q MAX 1
FADINI® ASTRO 78A

DICKERT® MAHS27 Remote

Remove Remote
  • F 27,015
  • C FIX CODE
  • B 1,2 4
  • AP NO
  • M-Q MAX 1
DICKERT® MAHS27

FADINI® ASTRO 433 Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 2,4
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FADINI® ASTRO 433

SEAV® HAPPY S Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 1,2,3
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
SEAV® HAPPY S

DICKERT® FHS10-L Remote

Remove Remote
  • F 40,685
  • C ROLLING CODE
  • B 1,2 4
  • AP NO
DICKERT® FHS10-L

FADINI® ASTRO 433M Remote

Remove Remote
  • F 433,92
  • C FIX CODE
  • B 2
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FADINI® ASTRO 433M

SEAV® HAPPY RH Remote

Remove Remote
  • F 868,3
  • C ROLLING CODE
  • B 1,2,3
  • AP NO
  • M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-48
SEAV® HAPPY RH

Synchronising intructions

Print

HOW TO SYNCHRONISE SEAV ROLLING CODE REMOTE CONTROLS

Remote synchronisation procedure for SEAV remote controls

1. Stand near the receiver and press the first desired channel on the already synchronised (master) remote control for 15 seconds.

The receiver LED will begin to flash while it is waiting for transmission of a code.

2. Press the button for the same channel on the remote control to be synchronised (slave).

The receiver LED will light up steady, indicating that the channel has been synchronised.

Repeat the operation for the remaining channels.

Direct synchronisation procedure for SEAV remote controls

1. Open the receiver and press the button marked SEL.

The CODE CH1 LED will begin to flash while it is waiting for transmission of a code.

2. Press the button for the same channel on the remote control to be synchronised (slave).

The receiver LED will light up steady, indicating that the channel has been synchronised.

Repeat the same process for the second channel but pressing the SEL button twice (the CODE CH2 LED will flash) and pressing the second button on the slave device.

Observations

If the procedure fails, it may mean that the receiver memory is full, preventing synchronisation of new devices without the installer\'s permission.

The selected remotes can not be copied with a single JMA remote