SMINN® DUPLO

SMINN® DUPLO

HOW TO SYNCHRONISE SMINN ROLLING CODE REMOTE CONTROLS

SMINN remote control synchronisation can be performed directly on the receiver itself or via radio by invitation.

Synchronising the remote control directly on the receiver

1. Press and hold button K1 (fig. 1 - component 3).

2. Press the button for the channel on the transmitter that you want to record and that will be assigned to Output 1 (relay K1) on the receiver board. On receiving the code and channel sent by the transmitter, the receiver records it in its memory and beeps TWICE consecutively to confirm.

ONLY FOR RECORDING THE FIRST CODE.

3. Press the button for the channel on the transmitter that you want to assign to Output 2 (relay K2) on the receiver board. On receiving the code and channel sent by the transmitter, the receiver records it in its memory and beeps THREE TIMES to confirm.

4. Release the synchronisation button on the receiver.

Synchronising the remote control via radio

Copying a transmitter that already works on the installation enables the copy to self-synchronise the first time it is used.