HOW TO SYNCHRONISE DTM NEO SPACE ROLLING CODE REMOTE CONTROLS

DTM NEO remote control synchronisation can be performed either directly on the receiver itself or remotely using a remote control that is already synchronised with the receiver.

Remotely synchronising the remote control on the receiver

1. While holding the receiver’s button, press a button in the remote which you want to register. The light will blink.

While registering the remote in the receiver’s memory, the button controlling the output channel must be used. Only one button of the remote can be registered. Registering another button of the same remote will result in removing the previous one.

Synchronising the remote control directly on the receiver

1. press and hold button in previously registered remote for 15 seconds,

2. press and hold button in a remote which you want to register for 15 seconds, within 3 seconds after releasing the previous button,

3. the new remote is now registered with the same active button as in the previously registered remote.