FIND YOUR REMOTE
Find your remote and compatable JMA Remote to copy
Frequency
Type of code
- Fixed. The code emitted by the remote control, is always the same. There is no encryption and once the remote control is duplicated, the copy works directly in the receiver.
- Rolling. The code emitted by the remote control, changes with each pulse. A copy of the remote control should be made, that way generating the same brand and model but with a different serial number, that will be necessary for registry in the receiver. There are specific instructions for each receiver of either how to register the copy, remotely or directly manipulating the receiver.
Buttons
Auto-Programmable The remote control can be registered in the receiver without the need of the original remote control, as long as radio communication is activated and the memory is not full.
PROCESS:
- In front of the receiver keep the JMA remote control pressed during 10 seconds until the red LED goes off (after 4 seconds) and it turns to green (at 10 seconds).
- Once the LED is green, release the button and wait for the LED to definitely go off. During the process, the green LED will flash once or several times depending on the code type until finally going off.
If the process does not work, test the standard method using the original remote control or gaining access directly from the receiver.
Copy
No copy
FOR: SEAV® BE EASY
- F 433,92
- C FIX CODE
- B 2
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FOR: SEAV® BE GOOD
- F 433,92
- C ROLLING CODE
- B 1,2,3
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
SYNCHRONISING SEAV ROLLING CODE REMOTE CONTROLS
Remote synchronisation procedure for the SEAV remote control
1. Stand near the receiver and press the first desired channel on the already synchronised remote control for 15 seconds.
The receiver LED will begin to flash while it is waiting for transmission of a code.
2. Press the button for the same channel on the remote control to be synchronised.
The receiver LED will light up steady, indicating that the channel has been synchronised.
Repeat the operation for the remaining buttons.
Direct synchronisation procedure for the SEAV remote control
1. Open the receiver and press the button marked SEL.
The CODE CH1 LED will begin to flash while it is waiting for transmission of a code.
2. Press the button for the same channel on the remote control to be synchronised.
The receiver LED will light up steady, indicating that the channel has been synchronised.
Repeat the same process for the second channel but pressing the SEL button twice (the CODE CH2 LED will flash) and pressing the second button on the duplicated device.
Observations
If the procedure fails, it may mean that the receiver memory is full and impedes synchronisation of new devices without the installer\'s permission.
FOR: SEAV® BE SMART S2
- F 433,92
- C FIX CODE
- B 2,4
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FOR: SEAV® HAPPY RH
- F 868,3
- C ROLLING CODE
- B 1,2,3
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-48
HOW TO SYNCHRONISE SEAV ROLLING CODE REMOTE CONTROLS
Remote synchronisation procedure for SEAV remote controls
1. Stand near the receiver and press the first desired channel on the already synchronised (master) remote control for 15 seconds.
The receiver LED will begin to flash while it is waiting for transmission of a code.
2. Press the button for the same channel on the remote control to be synchronised (slave).
The receiver LED will light up steady, indicating that the channel has been synchronised.
Repeat the operation for the remaining channels.
Direct synchronisation procedure for SEAV remote controls
1. Open the receiver and press the button marked SEL.
The CODE CH1 LED will begin to flash while it is waiting for transmission of a code.
2. Press the button for the same channel on the remote control to be synchronised (slave).
The receiver LED will light up steady, indicating that the channel has been synchronised.
Repeat the same process for the second channel but pressing the SEL button twice (the CODE CH2 LED will flash) and pressing the second button on the slave device.
Observations
If the procedure fails, it may mean that the receiver memory is full, preventing synchronisation of new devices without the installer\'s permission.
FOR: SEAV® HAPPY RS
- F 433,92
- C ROLLING CODE
- B 1,2,3
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
SYNCHRONISING SEAV ROLLING CODE REMOTE CONTROLS
Remote synchronisation procedure for the SEAV remote control
1. Stand near the receiver and press the first desired channel on the already synchronised remote control for 15 seconds.
The receiver LED will begin to flash while it is waiting for transmission of a code.
2. Press the button for the same channel on the remote control to be synchronised.
The receiver LED will light up steady, indicating that the channel has been synchronised.
Repeat the operation for the remaining buttons.
Direct synchronisation procedure for the SEAV remote control
1. Open the receiver and press the button marked SEL.
The CODE CH1 LED will begin to flash while it is waiting for transmission of a code.
2. Press the button for the same channel on the remote control to be synchronised.
The receiver LED will light up steady, indicating that the channel has been synchronised.
Repeat the same process for the second channel but pressing the SEL button twice (the CODE CH2 LED will flash) and pressing the second button on the duplicated device.
Observations
If the procedure fails, it may mean that the receiver memory is full and impedes synchronisation of new devices without the installer\'s permission.
FOR: SEAV® HAPPY S
- F 433,92
- C FIX CODE
- B 1,2,3
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FOR: SEAV® HAPPY S NEGRO
- F 433,92
- C FIX CODE
- B 1,2,3
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FOR: SEAV® TX
- F 433,92
- C FIX CODE
- B 1,2,3,4,6
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
