FIND YOUR REMOTE
Find your remote and compatable JMA Remote to copy
Frequency
Type of code
- Fixed. The code emitted by the remote control, is always the same. There is no encryption and once the remote control is duplicated, the copy works directly in the receiver.
- Rolling. The code emitted by the remote control, changes with each pulse. A copy of the remote control should be made, that way generating the same brand and model but with a different serial number, that will be necessary for registry in the receiver. There are specific instructions for each receiver of either how to register the copy, remotely or directly manipulating the receiver.
Buttons
Auto-Programmable The remote control can be registered in the receiver without the need of the original remote control, as long as radio communication is activated and the memory is not full.
PROCESS:
- In front of the receiver keep the JMA remote control pressed during 10 seconds until the red LED goes off (after 4 seconds) and it turns to green (at 10 seconds).
- Once the LED is green, release the button and wait for the LED to definitely go off. During the process, the green LED will flash once or several times depending on the code type until finally going off.
If the process does not work, test the standard method using the original remote control or gaining access directly from the receiver.
Copy
No copy
FOR: FADINI® ASTRO 40
- F 40,665
- C FIX CODE
- B 1,2,4
- AP NO
- M-Q MAX 2 / M-Q MAX 1
FOR: FADINI® ASTRO 433
- F 433,92
- C FIX CODE
- B 2,4
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FOR: FADINI® ASTRO 433M
- F 433,92
- C FIX CODE
- B 2
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / LITE / M-NOVA PRO / M-BT Advance / SR-4V / SR-48
FOR: FADINI® ASTRO 75
- F 315
- C FIX CODE
- B 1,2,4
- AP NO
- M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance / SR-4V
FOR: FADINI® BIRIO
- F 868,3
- C ROLLING CODE
- B 1,2,4
- AP YES
- M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance
SYNCHRONISING FADINI ROLLING CODE REMOTE CONTROLS
FADINI remote controls can be synchronised either directly on the receiver or remotely using a remote control already synchronised with the receiver.
Remote synchronisation procedure
1. Press buttons 1 and 2 simultaneously on the new remote control and hold for 10 seconds.
2. Release, and before 15 seconds elapse press buttons 1 and 2 of the device already synchronised in the facility and hold for at least 10 seconds.
3. Finally, press any button of the device to be synchronised.
Direct synchronisation procedure on the receiver
1. In the receiver, use a jumper to bypass C1.
2. Press button P in the receiver and button 1 on the remote control to be synchronised for 5 seconds.
3. Release the buttons on both devices and remove the jumper.
4. Repeat the operation for all channels, bypassing the relevant channel each time (C2, C3 and C4).
FOR: FADINI® JUBI 433
- F 433,92
- C ROLLING CODE
- B 1,2,4
- AP YES
- M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance
SYNCHRONISING FADINI ROLLING CODE REMOTE CONTROLS
FADINI remote controls can be synchronised either directly on the receiver or remotely using a remote control already synchronised with the receiver.
Remote synchronisation procedure
1. Press buttons 1 and 2 simultaneously on the new remote control and hold for 10 seconds.
2. Release, and before 15 seconds elapse press buttons 1 and 2 of the device already synchronised in the facility and hold for at least 10 seconds.
3. Finally, press any button of the device to be synchronised.
Direct synchronisation procedure on the receiver
1. In the receiver, use a jumper to bypass C1.
2. Press button P in the receiver and button 1 on the remote control to be synchronised for 5 seconds.
3. Release the buttons on both devices and remove the jumper.
4. Repeat the operation for all channels, bypassing the relevant channel each time (C2, C3 and C4).
FOR: FADINI® JUBI SMALL
- F 433,92
- C ROLLING CODE
- B 2
- AP YES
- M-BT Biometric / BT Slim / M-FR1 / M-NOVA PRO / M-BT Advance
SYNCHRONISING FADINI ROLLING CODE REMOTE CONTROLS
FADINI remote controls can be synchronised either directly on the receiver or remotely using a remote control already synchronised with the receiver.
Remote synchronisation procedure
1. Press buttons 1 and 2 simultaneously on the new remote control and hold for 10 seconds.
2. Release, and before 15 seconds elapse press buttons 1 and 2 of the device already synchronised in the facility and hold for at least 10 seconds.
3. Finally, press any button of the device to be synchronised.
Direct synchronisation procedure on the receiver
1. In the receiver, use a jumper to bypass C1.
2. Press button P in the receiver and button 1 on the remote control to be synchronised for 5 seconds.
3. Release the buttons on both devices and remove the jumper.
4. Repeat the operation for all channels, bypassing the relevant channel each time (C2, C3 and C4).